Mechanical Part

Ramjet 350 with MEFI 4 controller. 9500 miles on motor ran good no issues just

swapped to a LS engine. Oil changed every 3k with Mobil 1. $3500 includes starter and drive belt system with motor.

Grand Forks, ND

$3,000

2024-08-28 06:03:53

2003-2005 2.0L MOPAR ENGINE

2003-2005 2.0L MOPAR ENGINE 2003-2005 2.0L MOPAR ENGINE, it was installed in a 2004 dodge neon with 113,000 miles on it, has a new timing belt and a new tensioner, new rear main seal,

Inkster, ND

$400

2024-08-24 03:45:12

Starter New AC Delco 323-374

Fits GM 6.0L

Grand Forks, ND

$50

2024-08-20 01:00:47

Gates serpentine belts 62 new in package Gates V-belts 87 new in package Gates Radiator hoses 44 new with label

Gates Belts and Hoses

Grand Forks, ND

$600

2024-08-11 00:56:19

4 Photos

3.9L,General Motors SFI, V6, Used Engine Assembly

We have For Sale a 3.9 L V6 engine out of a 2008 Chevrolet Uplander, with a Engine VIN code of 1 and build sheet code of LZ9. Will work in other

Inkster, ND

2024-08-08 00:35:56

2006 BMW X3 3.0i Used Engine Assembly

We have for sale a used Engine Assembly out of a 2006 BMW X3, will fit 2004 - 2006 X3 model years. Runs great Sounds great, does not smoke or knock,

Inkster, ND

2024-08-03 11:01:23

2001 Hyundai Elantra for parting out

This Hyundai runs and drives with 170686 miles on a 2.0 L engine and automatic transmission. Has a few good body and interior parts. Please message

Inkster, ND

Starter New AC Delco 323-372

2024-07-24 03:55:28

Fits GM 366 427 454

Grand Forks, ND

$50

2024-07-03 06:19:50

2 Photos

2004 - 2010 BMW X3 3.0i FRONT TIE ROD ASSEMBLY LEFT OR RIGHT SIDE (NEW)

This is a NEW aftermarket inner and outer tie rod assembly ordered for a 2006 BMW X3 never opened still in original packaging

Inkster, ND

$75 OBO

2024-06-23 21:15:50

Starter New World Wide 25221

Fits older Fords

Grand Forks, ND

$35

2024-06-17 00:17:19

1997 Buick Lesabre Custom for Parting Out

This Buick has a great running 3800 V6 engine with a VIN code of K and a build sheet code of L36 : ENGINE GAS, 6 CYL, 3.8K, MFI, V6, HO (ERV6 SERIES),

Inkster, ND

2024-04-23 06:13:37

2000 Ford F-150 4X4 PARTING OUT

Parting out a 2000 F-150 has a bad 5.4 L motor, would be good for a core or rebuilder, good good body parts, interior parts, and a good transfer case 4406-2

Inkster, ND

2024-04-16 05:57:19

1996 Ford Explorer transmission and transfer case and Rear Axle

181907 miles, 4R55E transmission shifts great, 4405-07 transfer case works great, 8.8 NON locking 5L16 code, with 3.55 Axle gear

Inkster, ND

2024-03-02 07:37:21

302 C.I. / 5.0 L GT40P CYLINDER HEADS, FACTORY CAST EXHAUST HEADERS

302 C.I. / 5.0 L GT40P CYLINDER HEADS, FACTORY CAST EXHAUST HEADERS, UPPER INTAKE PLENUM, LOWER INTAKE WITH INJECTORS. All

Inkster, ND

$500 OBO

2024-02-26 06:12:13

1997 - 2000 Ford F-150 Radiator

Part Number # 8011831. This Radiator was installed and driven for possibly 6 months then parked for approximately 1 1/2 years. I installed it in 2020 and the date

Inkster, ND

$150

2024-01-03 00:42:54

2007 DODGE CHARGER FOR PARTING OUT

This Charger is RWD 4 door sedan, has 232752 Miles on it, 3.5 L engine runs good, sounds good, build sheet code, EGG : 3.5L High Output V6 24V MPI Engine, VIN

Inkster, ND

Additional results related to "Mechanical Part Mechanical Part"

2024-09-03 08:28:37

2000-2005 Impala, MonteCarlo, Lumina Sub Frame # 10331128

We have up For Sale a used sub frame / K frame came off a 2001 Impala in very good condition, will fit 2000-2005 Impala, MonteCarlo, Lumina.

Inkster, ND

$500

2024-08-28 19:31:58

Ramjet 350 with MEFI 4 controller. 9500 miles on motor ran good no issues just

swapped to a LS engine. Oil changed every 3k with Mobil 1. $3500 includes starter and drive belt system with motor.

Grand Forks, ND

$3,000

2024-08-28 06:03:53

2003-2005 2.0L MOPAR ENGINE

2003-2005 2.0L MOPAR ENGINE 2003-2005 2.0L MOPAR ENGINE, it was installed in a 2004 dodge neon with 113,000 miles on it, has a new timing belt and a new tensioner, new rear main seal,

Inkster, ND

$400

2024-08-24 03:45:12

Starter New AC Delco 323-374

Fits GM 6.0L

Grand Forks, ND

$50

2024-08-20 01:00:47

Gates serpentine belts 62 new in package Gates V-belts 87 new in package Gates Radiator hoses 44 new with label

Gates Belts and Hoses

Grand Forks, ND

$600

2024-08-11 00:56:19

4 Photos

3.9L,General Motors SFI, V6, Used Engine Assembly

We have For Sale a 3.9 L V6 engine out of a 2008 Chevrolet Uplander, with a Engine VIN code of 1 and build sheet code of LZ9. Will work in other

Inkster, ND

2024-08-08 00:35:56

2006 BMW X3 3.0i Used Engine Assembly

We have for sale a used Engine Assembly out of a 2006 BMW X3, will fit 2004 - 2006 X3 model years. Runs great Sounds great, does not smoke or knock,

Inkster, ND

2024-08-03 11:01:23

2001 Hyundai Elantra for parting out

This Hyundai runs and drives with 170686 miles on a 2.0 L engine and automatic transmission. Has a few good body and interior parts. Please message

Inkster, ND

Starter New AC Delco 323-372

2024-07-24 03:55:28

Fits GM 366 427 454

Grand Forks, ND

$50

2024-07-03 06:19:50

2 Photos

2004 - 2010 BMW X3 3.0i FRONT TIE ROD ASSEMBLY LEFT OR RIGHT SIDE (NEW)

This is a NEW aftermarket inner and outer tie rod assembly ordered for a 2006 BMW X3 never opened still in original packaging

Inkster, ND

$75 OBO

2024-06-23 21:15:50

Starter New World Wide 25221

Fits older Fords

Grand Forks, ND

$35

2024-06-17 00:17:19

1997 Buick Lesabre Custom for Parting Out

This Buick has a great running 3800 V6 engine with a VIN code of K and a build sheet code of L36 : ENGINE GAS, 6 CYL, 3.8K, MFI, V6, HO (ERV6 SERIES),

Inkster, ND

2024-04-23 06:13:37

2000 Ford F-150 4X4 PARTING OUT

Parting out a 2000 F-150 has a bad 5.4 L motor, would be good for a core or rebuilder, good good body parts, interior parts, and a good transfer case 4406-2

Inkster, ND

2024-04-16 05:57:19

1996 Ford Explorer transmission and transfer case and Rear Axle

181907 miles, 4R55E transmission shifts great, 4405-07 transfer case works great, 8.8 NON locking 5L16 code, with 3.55 Axle gear

Inkster, ND

2024-03-02 07:37:21

302 C.I. / 5.0 L GT40P CYLINDER HEADS, FACTORY CAST EXHAUST HEADERS

302 C.I. / 5.0 L GT40P CYLINDER HEADS, FACTORY CAST EXHAUST HEADERS, UPPER INTAKE PLENUM, LOWER INTAKE WITH INJECTORS. All

Inkster, ND

$500 OBO

2024-02-26 06:12:13

1997 - 2000 Ford F-150 Radiator

Part Number # 8011831. This Radiator was installed and driven for possibly 6 months then parked for approximately 1 1/2 years. I installed it in 2020 and the date

Inkster, ND

$150

2024-01-03 00:42:54

2007 DODGE CHARGER FOR PARTING OUT

This Charger is RWD 4 door sedan, has 232752 Miles on it, 3.5 L engine runs good, sounds good, build sheet code, EGG : 3.5L High Output V6 24V MPI Engine, VIN

Inkster, ND